Troubleshooting method for multi station cold heading machine
Source：http://www.lgongchem.com Author：冷鐓機(jī) Time：2015/1/21 Click：
Regular maintenance of multi station cold heading machines is very necessary. If not properly maintained, some minor malfunctions may occur. Let's explain the relevant matters regarding the maintenance of multi station cold heading machines. Multi station automatic cold heading machine refers to the use of cold heading method to make various hexagonal nuts from materials, which are then threaded and fed through roller drive. The machine completes several processes including feeding, cutting, ball pressing, corner pressing, punching, etc.
So what are the common faults of cold heading machines,
1、 Before starting up, carefully check whether all fasteners of the equipment are locked and whether the safety protection devices are intact. Regularly check during operation, as loosening due to severe vibration can also cause malfunctions.
2、 After adjusting the equipment, first turn the flywheel to check if all mechanisms are working properly. After removing the lever used for turning the car, start the motor to see if the machine is running normally
3、 Protective devices must be added to prevent accidents caused by rupture.
4、 In the event of a malfunction, multiple cold heading stations must be immediately stopped to identify the cause and eliminate potential hazards.
- 上一篇：The importance of cold heading 2015/1/22
- 下一篇：Machinery Exhibition [Image] 2014/12/15
